overview culture chamber hybridisation incubator incubator with shaker cooling incubator co2 incubators co2 incubators co2 incubator with shaker mini shaking incubator shaking incubator co2 incubator forced air incubator n. convection incubator vacuum drying oven forced air oven mini digital dry bath digital dry bath bioshake xp bioshake iq adapter & accessories bioshake 3000 2d and 3d mixers biomixer vortex mixer up50h up100h up200h industrial uip500hd industrial uip1000hd homogenizer
 
 
 
 
ULTRASONIC UP200H          science laboratory
 
 
ULTRASONIC PROCESSOR UP200H
 
UP200H / UP200S - Ultrasonic Power for the Lab
 
The ultrasonic lab devices UP200H (200 W and 24 kHz) and UP200S (200 W and 24 kHz) are well suited for all general ultrasonic applications in small and medium scale. The applications include: Homogenization, disintegration, emulsification, cell disruption, degassing or sonochemistry.
 
The RT10 is provided with a mounting rack that holds 50-0.5 ml centrifuge tubes and 48-1.5ml centrifuge tubes.
The RT11 is provided with a mounting rack that holds only 1.5 ml centrifuge tubes, 88 in total. The RT12 is provided with a mounting rack holding 14-12/13 mm and 14-15/16 mm capped test tubes or vaccutainer tubes.
 
UP200H:
The ultrasonic processor UP200H (200 watts and 24 kHz) is the most powerful handheld device, but it can can be used at a stand.
 
UP200S Stand Mounted:
The ultrasonic processor UP200S (200 watts and 24kHz) differs from the UP200H only in its shape and can be usedat a stand or in the sound protection box, only. It is the first choice for your laboratory, when no handheld operation is needed.
 
Both the ultrasonic device UP200H and UP200S are very effective in thehomogenizing, dispersing, emulsifying, extracting and degassing or in the disruption of cells. They can be used to enable, enhance orspeed up chemical reactions (Sonochemistry) too.
 
Generally, the UP200H and UP200S are used for the sonication of sample volumes from 0.1 to 2000mL.
We offer sonotrodes from 1 to 40mm that can be used for either of the devices.
The 40mm sonotrode transmits the ultrasound smoothly across a relatively large surface. Therefore, it is suited to support degassing or cleaning processes. The smaller sonotrodes operate at higher amplitudes and at higher intensities for harder applications.
The UP200H and UP200S are also used for the production of smaller quantities, mostly in continuous flow with the use of flow cells and the appropriate sonotrodes. In combination with the flow cell D14K, you can sonicate material in continuous flow at 20 to 200mL per minute. By this, you can simulate continuous sonication processes in smallest scale.
Both devices can be operated 24 hours per day (24H/7D), allowing for the processing of up to 180L per day (Depending on the application).
 

Please choose the following items for your lab applications:

1
Ultrasonic Processor UP200H: For handheld operation or for stand use, 200 watts, ultrasonic frequency 24kHz, automatic frequency tuning system, amplitude adjustable from 20 to 100%, pulse adjustable from 0 to 100%,
dry running protected, with 9-pin DSUB interface, in portable case, for use with stand ST1-16 or sound protection box SB3-16, with mounting tools, IP40 grade, titanium horn with female thread M8x1, dimensions (L x W x H): 275 x 200 x 160mm and weight: 2.1kg
2
Ultrasonic Processor UP200S: For stand-mounted operation, 200 watts, ultrasonic frequency 24kHz, automatic frequency tuning system, amplitude adjustable from 20 to 100%, pulse adjustable from 0 to 100%, dry running protected, with 9-pin DSUB interface, in portable case, for use with stand ST1-16 or sound protection box SB1-16, with mounting tools, IP40 grade, titanium horn with female thread M8x1, dimensions (L x W x H): 290 x 210 x 100mm and weight: 2.3kg
3
Sonotrode S1: Made of titanium, tip diameter 1mm, approximately length 100mm, male thread M8x1, for samples from 0.1ml up to 5ml
4
Sonotrode S2: Made of titanium, tip diameter 2mm, approximately length 100mm, male thread M8x1, for samples from 2ml up to 50ml
5
Sonotrode S3: Made of titanium, tip diameter 3mm, approximately length 100mm, male thread M8x1, for samples from 5ml up to 200ml
6
Sonotrode S7: Made of titanium, tip diameter 7mm, approximately length 100mm, male thread M8x1, for samples from 20ml up to 500ml
7
Sonotrode S14: Made of titanium, tip diameter 14mm, approximately length 100mm, male thread M8x1, for samples from 50ml up to 1000ml
8
Sonotrode S14D: Made of titanium, tip diameter 14mm, approximately length 100mm, male thread M8x1, with seal for closed systems
9
Sonotrode S14L2D: Made of titanium, tip diameter 14mm, approximately length 200mm, male thread M8x1, with seal for closed systems
10
Sonotrode S40: Made of titanium, diameter 40mm, approximately length 100mm, male thread M8x1, for samples from 100ml up to 1000ml
11
Stand ST1-16: Diameter 16mm, made of stainless steel, base length 300mm, width 150mm, height 600mm
12
ST1-Clamp: Damp for holding diam. 0 to 63mm, made of aluminum, for use with stand stands of up to 16.5mm
13
LabLift: For the easy positioning of samples under the ultrasonic probes to control immersion depth, stainless steel, footprint 100x100mm, adjustable height: 50 to 125mm
14
Timer T1: From 00:00 to 99:59 (Minute and second)
15
Flow Cell D14K: Made of stainless steel, with cooling, hose connectors, for fluids, autoclavable, for operation with sonotrode S14D, volume approx. 15ml, with stand-adapter for stand ST1-16 (Diameter 16mm)
16
Flow Cell GD14K: Made of glass, with cooling, hose connectors, for fluids, autoclavable, for operation with sonotrode S14D (Or with sonotrode S14L2D in combination with flask adapter NSA2), volume approx. 75ml, with clamp for installation at stand, e.g. stand ST1-16 (Diameter 16mm)
17
Sonication Beaker BB1-16: Beaker for the indirect sonication of samples, with stand-adapter for stand ST1-16 (diameter 16mm)
18
Flask Adapter NSA2: For standard flask-neck, vertically adjustable, suitable for sonotrode S14L2D in combination with flow cell GD14K
19
PC-control lab version with power and temperature recording (Iincluding temperature probe), consisting of interface box (Aluminum, 105x80x30), connection cable leading to the 9-pin DSUB socket (RS232) at the PC, software for Windows
 
 
  Copyright © AUSGIANT LABORATORY EQUIPMENT PTY LTD. All rights reserved.
25, 43 Johnson Street, CHATSWOOD, NSW 2067 AUSTRALIA
TEL: +61 2 9411 2452    FAX: +61 2 9412 2048    E-MAIL:
info@ausgiant.net.au
Click AUSGIANT LABORATORY EQUIPMENT (WWW.AUSGIANT.NET.AU)