overview culture chamber hybridisation incubator incubator with shaker cooling incubator co2 incubators co2 incubators co2 incubator with shaker mini shaking incubator shaking incubator co2 incubator forced air incubator n. convection incubator vacuum drying oven forced air oven mini digital dry bath digital dry bath bioshake xp bioshake iq adapter & accessories bioshake 3000 2d and 3d mixers biomixer vortex mixer up50h up100h up200h industrial uip500hd industrial uip1000hd homogenizer
 
 
 
 
ULTRASONIC UP100H          science laboratory
 
 
ULTRASONIC PROCESSOR UP 100H
 
UP100H - Compact Ultrasonic Laboratory Device
 
The ultrasonic processor UP100H (100 W, 30 kHz) is the perfect device for the sonication of small and medium size lab samples. This compact, yet powerful, lab homogenizer is commonly used for sample preparation, such as emulsifying, dispersing, dissolving and cell disruption.
 
The ultrasonic processor UP100H (100 watts, 30kHz) has the same compact and ergonomic design as the UP50H (50 watts, 30kHz) but it comes with twice the ultrasonic power. At 1.1kg, it is lightweight in the hand.
Of course, an operation at a stand is possible, too. The ultrasonic generator and the transducer are combined in one unit, so that there are no hassles with connecting cables. One power supply cable, that's all.
This device is most suitable for the ultrasonication of very small as well as medium-sized samples.
With the use of the sonotrode MS10 the range of application expands to the sonication of volumes of up to 500ml.
 
Therefore, this ultrasonic device is mainly used for the preparation of samples in the lab:
 

APPLICATIONS

- Emulsifying (Mixing of immiscible liquids)
- Dispersing (Mixing of powders into liquids)
- Homogenizing and Disintegration
- Cell disruption (Lysis) and Extraction
- Deagglomeration of nanomaterials
- Degassing
 
In combination with the flow cell D7K, you can sonicate material in continuous flow at 10 to 100mL/ per minute.
By this, you can simulate continuous sonication processes in smallest scale. As the UP100H can be operated 24 hours per day (24h/7d), this setup could process up to 140L per day (Depending on the application).
The optional PC-control may be helpful, if a test record is necessary or to optimize processes.
 

Please choose the following items for your lab applications:

1
Ultrasonic Processor UP100H: For handheld operation or for stand use, 100 watts, ultrasonic frequency 30kHz, automatic frequency tuning system, amplitude adjustable from 20 to 100%, pulse adjustable from 0 to 100%,
dry running protected, with 9-pin DSUB interface, in portable case, with stand holder for use with stand ST1-16 or sound protection box SB2-16, with mounting tools, IP40 grade, titanium horn with female thread M6x0.75
Dimensions (L x W x H):185 x 130 x 85mm and weight: 1.1kg
2
Sonotrode MS1: Made of titanium, tip diameter 1mm, approximately length 80mm, male thread M6x0.75, for samples from 0.1ml up to 5ml
3
Sonotrode MS2: Made of titanium, tip diameter 2mm, approximately length 80mm, male thread M6x0.75, for samples from 2ml up to 50ml
4
Sonotrode MS3: Made of titanium, tip diameter 3mm, approximately length 80mm, male thread M6x0.75, for samples from 5ml up to 100ml
5
Sonotrode MS7: Made of titanium, tip diameter 7mm, approximately length 80mm, male thread M6x0.75, for samples from 10ml up to 250ml
6
Sonotrode MS7D: Made of titanium, tip diameter 7mm, approximately length 80mm, male thread M6x0.75, with seal for closed systems
7
Sonotrode MS7L2D: Made of titanium, tip diameter 7mm, approximately length 160mm, male thread M6x0.75, with seal for closed systems
8
Sonotrode MS10: Made of titanium, tip diameter 10mm, approximately length 80mm, male thread M6x0.75, for samples from 20ml up to 500ml
9
Stand ST1-16: Diameter 16mm, made of stainless steel, base length 300mm, width 150mm, height 600mm
10
ST1-Clamp: Damp for holding diam. 0 to 63mm, made of aluminum, for use with stand stands of up to 16.5mm
11
LabLift: For the easy positioning of samples under the ultrasonic probes to control immersion depth, stainless steel, footprint 100 x 100mm, adjustable height: 50 to 125mm
12
Timer T1: From 00:00 to 99:59 (Minute and second)
13
Flow Cell D7K: Made of stainless steel, with cooling, hose connectors, for fluids, autoclavable, for operation with sonotrode MS7D, volume approx. 13ml, with stand-adapter for stand ST1-16 (Dameter 16mm)
14
Flow Cell GD7K: Made of glass, with cooling, hose connectors, for fluids, autoclavable, for operation with sonotrode MS7D (Or with sonotrode MS7L2D in combination with flask adapter NSA1), volume approx. 80ml, with clamp for installation at stand, e.g. stand ST1-16 (Diameter 16mm)
15
Flask Adapter NSA1: For standard flask-neck, vertically adjustable, suitable for sonotrode MS7L2D in combination with flow cell GD7K
16
PC-control lab version with power and temperature recording, including temperature probe, consisting of interface box (Aluminum, 105x80x30), connection cable leading to the 9-pin DSUB socket (RS232) at the PC, software for Windows
 
 
  Copyright © AUSGIANT LABORATORY EQUIPMENT PTY LTD. All rights reserved.
25, 43 Johnson Street, CHATSWOOD, NSW 2067 AUSTRALIA
TEL: +61 2 9411 2452    FAX: +61 2 9412 2048    E-MAIL:
info@ausgiant.net.au
Click AUSGIANT LABORATORY EQUIPMENT (WWW.AUSGIANT.NET.AU)