overview culture chamber hybridisation incubator incubator with shaker cooling incubator co2 incubators co2 incubators co2 incubator with shaker mini shaking incubator shaking incubator co2 incubator forced air incubator n. convection incubator vacuum drying oven forced air oven mini digital dry bath digital dry bath bioshake xp bioshake iq adapter & accessories bioshake 3000 2d and 3d mixers biomixer vortex mixer up50h up100h up200h industrial uip500hd industrial uip1000hd homogenizer
 
 
 
 
FORCED AIR INCUBATOR          science laboratory
 
 
 
 
- Maximum temperature +110”ĘC
- Microprocessor PID controller
- Fuzzy-Logic LCD display
- Keypad Timer up to 0-999hours 59minutes
- Real-Time Clock Programming: 50 programs with 15 steps (Temperature, gradient, time and fan speed)
- RS 232 Interface
- Automatic Restart after power cut-off
- 2 shelves
 
The Incubators are especially designed for incubation in clinical and industrial laboratories.
The exclusive intelli-fan system provides uniform and constant level temperature conditions at all locations within the chamber - independent of load.
High degree of precision is warranted over the full temperature range.
The inner door made of safety glass permits optical process monitoring without heat loss.
For decontamination purposes, the units can be heated up to + 110”ĘC.
 
Programmable Independence:
50 programs at 15 program steps each (set temperature, gradient, hold time, fan speed) can be stored with a maximum program duration of 999 hours 59 minutes.
The integrated real-time-clock simplifies programming.
All programs remain stored in case of power failure.
 
Safety Through Cleanliness:
The incubators are a well-rounded structure. All transitional points between walls, ceiling and chamber bottom are deep-drawn, thus promoting easy cleaning. Unwanted germs and dirt do not find any place to hide.
 
Precise Temperature Control:
The PT100 temperature sensor guarantees accurate temperature characteristics exactly as required by the programmed defaults.
 
Lead-Through:
The units are provided with a pass-through (Diameter 6 mm) for installation of additional temperature sensors or electric cables. 20 and 40 mm lead-through are available on request.
 

SPECIFICATIONS

MODEL
VOLUME
MAXIMUM TEMPERATURE
ORDER NUMBER
IC 40
40 litre
110°C
31A04070
IC 80
80 litre
110°C
31A04071
IC 160
160 litre
110°C
31A04072
IC 240
240 litre
110°C
31A04073
IC 400
400 litre
110°C
31A04074
 
ACCESSORIES
Wire shelf
 
OPTIONS
Entry port 20 mm
Entry port 40 mm
RS 485 Interface
Calibration certificate for one desired temperature and poiint
IQ/ OQ draft paper and 3 hard copies
Software (STS)
 

SPECIFICATIONS

MODELS
IC 40
IC 80
IC 160
IC 240
External Dimension (W x D x H) mm
650 x 510 x 510
750 x 600 x 540
800 x 680 x 720
890 x 720 x 820
Internal Dimension (W x D x H) mm
385 x 305 x 370
485 x 395 x 400
535 x 475 x 580
625 x 515 x 680
Internal Volume Litre
40 litre
80 litre
160 litre
240 litre
Wire Shelves (Standard/ maximum)
2/5
2/5
2/8
2/8
Wire Shelve Dimension (W x D) mm
335 x 280
440 x 370
485 x 450
570 x 490
Weight KG
40
50
60
70
Temperature
110”ĘC
110”ĘC
110”ĘC
110”ĘC
Temperature Variation at 37/110”ĘC
±0.3/0.8”ĘC
±0.3/0.8”ĘC
±0.5/1.2”ĘC
±0.5/1.2”ĘC
Temperature Fluctuation at 37”ĘC
±0.2”ĘC
±0.2”ĘC
±0.2”ĘC
±0.2”ĘC
Heating Up Time at 37°C per minute
10
14
20
26
 
 
  Copyright © AUSGIANT LABORATORY EQUIPMENT PTY LTD. All rights reserved.
25, 43 Johnson Street, CHATSWOOD, NSW 2067 AUSTRALIA
TEL: +61 2 9411 2452    FAX: +61 2 9412 2048    E-MAIL:
info@ausgiant.net.au
Click AUSGIANT LABORATORY EQUIPMENT (WWW.AUSGIANT.NET.AU)