overview gas mixer q cell analyser invivo2 200 invivo2 300 invivo2 400 invivo2 500 invivo2 1000 invivo2 plus sci-tive dual sci-tive all inclusive sci-tive n sci-tive nn bugbox bugbox plus bugbox m concept 400 concept 400 m concept plus concept 1000 concept 1000 invivo2
Microbiology Workstation
Aimed at larger laboratories or research applications, the dual chamber Concept 1000 boasts a host of unique features. Add in a 1000 plate working capacity and the Concept 1000 is a serious contender for the title of ultimate workstation.
The removable front allows access for equipment or to thoroughly clean the work area.
The dual chamber system is accessed through a central interlock. Each work chamber features independent control of temperature and humidity and has independent user access so two people can work at once.
An optional gas-mixing module can be interfaced with one chamber to create two independent environments.

Features and Benefits:

- 5 minute Interlock Cycle Time for rapid transfer of up to 78 plates (90 mm)
- Automatic Interlock Outer Door Operation for simple front loading access
- Minimum / Maximum Incubation Temperature - ambient +5°C to 45°C
- Dual Gas Operation; ANO2 gas mix and N2 for low gas consumption and running costs
- Workstation Fabrication is solvent bonded acrylic for optimum cell conditions


Workstation Fabrication

Solvent Bonded Acrylic

Bench Space Requirements Height (excluding stand): 780 mm
Width (side to side): 2400 mm
Depth: 720 mm
Internal Workstation Dimensions Height: 480 mm
Width: 800 mm
Depth: 500 mm
Workstation Weight Approximately 120kg
Interlock Dimension Height: 300 mm
Width: 320 mm
Depth: 300 mm

Interlock Cycle Time

5 minutes

Use the Capacity Checker to compare how many Plates/Flasks/Dishes fit into each Workstation.


Energy Saving Fluorescent Lamp for perfect illumination

Foot Operated High Intensity Halogen Lamp for close inspection of samples

Automated Humidity Control for optimum cell conditions

Gas Low Alarms to alert operator of gas requirements

Excess Gas Use Alarm to alert operator to possible gas leak on workstation

Ezee SleevesTM port entry system for quick bare hand access

Palladium Catalyst to maintain anaerobic environment

Detox for optimum workstation environment

10 Petri Dish Holders for colour coded plate storage

4 Wire Rack for storage of up to 30 plates

Anaerobic Strips to check anaerobic state of environment
Removable Front for easy front loading access and cleaning
Internal Mains Socket for powering small accessories
Single Plate Entry System to allow the direct introduction of individual plates without the interlock cycle


Removable Front for easy front loading access and cleaning

Internal Mains Socket for powering small accessories

Ultrasonic Humidity Control for improved cell conditions

Cable Gland Port to allow the passage of cables through the workstation wall without altering internal conditions

Vacuum Line Port to allow the attachment of a vacuum line used to remove waste media from plates without removing them from the anaerobic conditions inside the workstation.
Stand to support workstation where bench space is not available.
Data Logging Connection allows the user to monitor the temperature of the workstation via a PC.
  Copyright © AUSGIANT LABORATORY EQUIPMENT PTY LTD. All rights reserved.
25, 43 Johnson Street, CHATSWOOD, NSW 2067 AUSTRALIA
TEL: +61 2 9411 2452    FAX: +61 2 9412 2048    E-MAIL: