overview gas mixer q cell analyser invivo2 200 invivo2 300 invivo2 400 invivo2 500 invivo2 1000 invivo2 plus sci-tive dual sci-tive all inclusive sci-tive n sci-tive nn bugbox bugbox plus bugbox m concept 400 concept 400 m concept plus concept 1000 concept 1000 invivo2
Microbiology Workstation
For laboratories faced with high sample throughput, Concept Plus gives that extra edge.
610 plates can easily be incubated with plenty of working space to spare. The Concept Plus also allows users to transfer large bottles, flasks and other equipment, quickly and efficiently. The front-loading interlock features class leading "one touch" operation and easy access for loading/unloading.
Concept Plus cleverly combines a large capacity with a small footprint, providing an easily accessed working environment.
A pull forward storage shelf, port holders and colour coded petri-dish holders help to improve the ergonomics of working with anaerobes in your laboratory.
Features and Benefits:
- 5 minute Interlock Cycle Time for rapid transfer of up to 78 plates (90 mm)
- Automatic Interlock Outer Door Operation for simple front loading access
- Minimum / Maximum Incubation Temperature - ambient +5oC to 45oC
- Dual Gas Operation; ANO2 gas mix and N2 for low gas consumption and running costs
- Workstation Fabrication is solvent bonded acrylic for optimum cell conditions


Workstation Fabrication

Solvent Bonded Acrylic

Bench Space Requirements Height (excluding stand): 750 mm
Width (side to side): 1620 mm
Depth: 720 mm
Internal Workstation Dimensions Height: 480 mm
Width: 1000 mm
Depth: 500 mm
Workstation Weight Approximately 120kg
Interlock Dimension Height: 300 mm
Width: 320 mm
Depth: 300 mm

Interlock Cycle Time

5 minutes

Use the Capacity Checker to compare how many Plates/Flasks/Dishes fit into each Workstation.


Energy Saving Fluorescent Lamp for perfect illumination

Foot Operated High Intensity Halogen Lamp for close inspection of samples

Automated Humidity Control for optimum cell conditions

Gas Low Alarms to alert operator of gas requirements

Excess Gas Use Alarm to alert operator to possible gas leak on workstation

Ezee SleevesTM port entry system for quick bare hand access

Palladium Catalyst to maintain anaerobic environment

Detox for optimum workstation environment

5 Petri Dish Holders for colour coded plate storage

2 Wire Rack for storage of up to 30 plates

Anaerobic Strips to check anaerobic state of environment
Single Plate Entry System to allow the direct introduction of individual plates without the interlock cycle


Removable Front for easy front loading access and cleaning

Internal Mains Socket for powering small accessories

Ultrasonic Humidity Control for improved cell conditions

Cable Gland Port to allow the passage of cables through the workstation wall without altering internal conditions

Vacuum Line Port to allow the attachment of a vacuum line used to remove waste media from plates without removing them from the anaerobic conditions inside the workstation.
Stand to support workstation where bench space is not available.
Data Logging Connection allows the user to monitor the temperature of the workstation via a PC.
  Copyright © AUSGIANT LABORATORY EQUIPMENT PTY LTD. All rights reserved.
25, 43 Johnson Street, CHATSWOOD, NSW 2067 AUSTRALIA
TEL: +61 2 9411 2452    FAX: +61 2 9412 2048    E-MAIL: