overview gas mixer q cell analyser invivo2 200 invivo2 300 invivo2 400 invivo2 500 invivo2 1000 invivo2 plus sci-tive dual sci-tive all inclusive sci-tive n sci-tive nn bugbox bugbox plus bugbox m concept 400 concept 400 m concept plus concept 1000 concept 1000 invivo2
 
 
 
 
MICROBIOLOGY - CONCEPT 400          MICROBIOLOGY
 
 
Microbiology Workstation
With a working capacity of 500 plates, the Concept 400 more than meets the needs of most hospital and anaerobic microbiology laboratories. Providing a perfect combination of capacity, speed and innovation, the Concept 400 delivers simple sophistication and new levels of comfort and convenience.
 
The Concept 400 provides microbiologists with high quality incubation conditions combined with ease of use.
Taking just 45 seconds to transfer up to 39 plates this rapid interlock ensure that you continue to guarantee the best isolation rates for your anaerobes. The workstation includes a host of innovative features to provide an affordable and convenient system for anaerobic incubation.
 

Features and Benefits:

 
- 45 Seconds Interlock Cycle Time for rapid transfer of up to 26 plates (90 mm)
- Manual Interlock Outer Door Operation for simple front loading access
- Minimum / Maximum Incubation Temperature - ambient +5oC to 45oC
- Dual Gas Operation; ANO2 gas mix and N2 for low gas consumption and running costs
- Workstation Fabrication is solvent bonded acrylic for optimum cell conditions
 

SPECIFICATIONS

Workstation Fabrication

Solvent Bonded Acrylic

Bench Space Requirements Height (excluding stand): 750 mm
Width (side to side): 1120 mm
Depth: 720 mm
Internal Workstation Dimensions Height: 480 mm
Width: 800 mm
Depth: 500 mm
Workstation Weight Approximately 80kg
Interlock Dimension Height: 260 mm
Width: 120 mm
Depth: 280 mm

Interlock Cycle Time

45 seconds

 
Use the Capacity Checker to compare how many Plates/Flasks/Dishes fit into each Workstation.
 

STANDARD ACCESSORIES

Energy Saving Fluorescent Lamp for perfect illumination

Foot Operated High Intensity Halogen Lamp for close inspection of samples

Automated Humidity Control for optimum cell conditions

Gas Low Alarms to alert operator of gas requirements
Excess Gas Use Alarm to alert operator to possible gas leak on workstation

Ezee SleevesTM port entry system for quick bare hand access

Palladium Catalyst to maintain anaerobic environment

Detox for optimum workstation environment

3 Petri Dish Holders for colour coded plate storage

1 Wire Rack for storage of up to 30 plates

Anaerobic Strips to check anaerobic state of environment

Single Plate Entry System to allow the direct introduction of individual plates without the interlock cycle
 

OPTIONAL ACCESSORIES

Removable Front for easy front loading access and cleaning

Internal Mains Socket for powering small accessories.
Ultrasonic Humidity Control for improved cell conditions.

Cable Gland Port to allow the passage of cables through the workstation wall without altering internal conditions.

Vacuum Line Port to allow the attachment of a vacuum line used to remove waste media from plates without removing them from the anaerobic conditions inside the workstation.
Stand to support workstation where bench space is not available.

External Docking Facility allows the use of the internal environment of the workstation to prime anaerobic jars

Data Logging Connection allows the user to monitor the temperature of the workstation via a PC.
Power Failure Back Up System maintains the anaerobic environment inside workstation if there is a mains power failure
 
 
  Copyright © AUSGIANT LABORATORY EQUIPMENT PTY LTD. All rights reserved.
25, 43 Johnson Street, CHATSWOOD, NSW 2067 AUSTRALIA
TEL: +61 2 9411 2452    FAX: +61 2 9412 2048    E-MAIL:
info@ausgiant.net.au
Click AUSGIANT LABORATORY EQUIPMENT (WWW.AUSGIANT.NET.AU)