overview gas mixer q cell analyser invivo2 200 invivo2 300 invivo2 400 invivo2 500 invivo2 1000 invivo2 plus sci-tive dual sci-tive all inclusive sci-tive n sci-tive nn bugbox bugbox plus bugbox m concept 400 concept 400 m concept plus concept 1000 concept 1000 invivo2
 
 
 
 
MICROBIOLOGY - BUGBOX M          MICROBIOLOGY
 
 
Microbiology Workstation
The world's smallest microaerophilic workstation packs all of the innovative features into a compact bench print. Incorporating all of the familiar and proven features of the Bugbox, but tailored to interface with the Ruskinn Gas Mixing System.
 
The Gas Mixer Q System provides accurate control over O2 (0.1% - 20.9% in 0.1% increments) and CO2 (0% - 30% in 0.1% increments).
 
Like the Bugbox, taking just 800mm of bench space with a capacity to incubate up to 200 plates, the Bugbox M is the perfect way to improve isolation rates and is an easy to justify alternative to anaerobic jars providing a more stable environment.
 
We recognise that most general laboratories inoculate samples with cultures on the bench.
That's why samples are transferred, at up to 10 at a time in the colour coded petri tubes - 15 seconds is all it takes to transfer and guarantee the best isolation rates for your Microaerophilic organisms.
 
Add to this a range of optional accessories and you have the most convenient system for incubation of microaerophilics available.
 
The Bugbox M is very affordable and maintenance costs are the lowest in the product class.
 

Features and Benefits:

 
- 15 seconds Interlock Cycle Time for rapid transfer of up to 10 plates
- Manual Interlock Outer Door Operation for simple top loading access
- Minimum / Maximum Incubation Temperature - ambient +5oC to 45oC
- Up to 4 Gas Operation; H2/N2, CO2, N2, Air for low gas consumption and running costs
- Workstation Fabrication is solvent bonded acrylic for optimum cell environment
 

SPECIFICATIONS

Workstation Fabrication

Solvent Bonded Acrylic

Bench Space Requirements Height (excluding stand): 650 mm
Width (side to side): 800 mm
Depth: 660 mm
Internal Workstation Dimensions Height: 420 mm
Width: 500 mm
Depth: 460 mm
Workstation Weight Approximately 65kg
Interlock Dimension Height: 290 mm
Width: 100 mm
Depth: 100 mm

Interlock Cycle Time

15 seconds

 
Use the Capacity Checker to compare how many Plates/Flasks/Dishes fit into each Workstation.
 

STANDARD ACCESSORIES

Energy Saving Fluorescent Lamp for perfect illumination

Foot Operated High Intensity Halogen Lamp for close inspection of samples

Automated Humidity Control for optimum cell conditions

Gas Low Alarms to alert operator of gas requirements

Ezee SleevesTM port entry system for quick bare hand access

Palladium Catalyst to maintain anaerobic environment

Detox for optimum workstation environment

3 Petri Dish Holders for colour coded plate storage

Internal Mains Socket for powering small accessories
Single Plate Entry System to allow the direct introduction of individual plates without the interlock cycle
 

OPTIONAL ACCESSORIES

Internal Mains Socket for powering small accessories.
Ultrasonic Humidity Control for improved cell conditions.

Cable Gland Port to allow the passage of cables through the workstation wall without altering internal conditions.

Vacuum Line Port to allow the attachment of a vacuum line used to remove waste media from plates without removing them from the anaerobic conditions inside the workstation.
Stand to support workstation where bench space is not available.
Data Logging Connection allows the user to monitor the temperature of the workstation via a PC.
 
 
  Copyright © AUSGIANT LABORATORY EQUIPMENT PTY LTD. All rights reserved.
25, 43 Johnson Street, CHATSWOOD, NSW 2067 AUSTRALIA
TEL: +61 2 9411 2452    FAX: +61 2 9412 2048    E-MAIL:
info@ausgiant.net.au
Click AUSGIANT LABORATORY EQUIPMENT (WWW.AUSGIANT.NET.AU)