overview gas mixer q cell analyser invivo2 200 invivo2 300 invivo2 400 invivo2 500 invivo2 1000 invivo2 plus sci-tive dual sci-tive all inclusive sci-tive n sci-tive nn bugbox bugbox plus bugbox m concept 400 concept 400 m concept plus concept 1000 concept 1000 invivo2
Microbiology Workstation
The smallest anaerobic workstation packs all of the innovative features into a compact bench print.
Taking just 800 mm of bench space with a capacity to incubate up to 200 plates the Bugbox is the perfect way to improve isolation rates and is an easy to justify alternative to anaerobic jars. Bugbox is perfect as a 'personal workstation'.
We recognise that most general laboratories inoculate samples with anaerobic cultures on the bench.
That's why samples are transferred, at up to 10 at a time in the colour coded petri tubes - 15 seconds is all it takes to transfer and guarantee the best isolation rates for your anaerobes.
Add to this a range of optional accessories and you have the most convenient system for incubation of anaerobes available.

The Bugbox is very affordable and maintenance costs are the lowest in the product class.

Service intervals are only once a year and gas consumption could amount to just 3 or 4 cylinders of gas mix in 12 months. Many laboratories can justify the switch from jars to Bugbox on consumable savings alone.

Features and Benefits:
- 15 seconds Interlock Cycle Time for rapid transfer of up to 10 plates.
- Manual Interlock Outer Door Operation for simple top loading access.
- Minimum / Maximum Incubation Temperature - ambient +5°C to 45°C.
- Dual Gas Operation; ANO2 gas mix and N2 for low gas consumption and running costs.
- Workstation Fabrication is solvent bonded acrylic for optimum cell environment.


Workstation Fabrication

Solvent Bonded Acrylic

Bench Space Requirements Height (excluding stand): 650 mm
Width (side to side): 800 mm
Depth: 660 mm
Internal Workstation Dimensions Height: 420 mm
Width: 500 mm
Depth: 460 mm
Workstation Weight Approximately 45kg
Interlock Dimension Height: 200 mm
Width: 100 mm
Depth: 100 mm

Interlock Cycle Time

15 seconds

Use the Capacity Checker to compare how many Plates/Flasks/Dishes fit into each Workstation.


Energy Saving Fluorescent Lamp for perfect illumination

Foot Operated High Intensity Halogen Lamp for close inspection of samples

Automated Humidity Control for optimum cell conditions

Gas Low Alarms to alert operator of gas requirements

Ezee SleevesTM port entry system for quick bare hand access

Palladium Catalyst to maintain anaerobic environment

Detox for optimum workstation environment

3 Petri Dish Holders for colour coded plate storage

Anaerobic Strips to check anaerobic state of environment



Internal Mains Socket for powering small accessories.
Ultrasonic Humidity Control for improved cell conditions.

Cable Gland Port to allow the passage of cables through the workstation wall without altering internal conditions.

Vacuum Line Port to allow the attachment of a vacuum line used to remove waste media from plates without removing them from the anaerobic conditions inside the workstation.
Stand to support workstation where bench space is not available.
External Docking Facility allows the use of the internal environment of the workstation to prime anaerobic jars.
Data Logging Connection allows the user to monitor the temperature of the workstation via a PC.
Power Failure Back Up System maintains the anaerobic environment inside workstation if there is a mains power failure.
  Copyright © AUSGIANT LABORATORY EQUIPMENT PTY LTD. All rights reserved.
25, 43 Johnson Street, CHATSWOOD, NSW 2067 AUSTRALIA
TEL: +61 2 9411 2452    FAX: +61 2 9412 2048    E-MAIL: