overview gas mixer q cell analyser invivo2 200 invivo2 300 invivo2 400 invivo2 500 invivo2 1000 invivo2 plus sci-tive dual sci-tive all inclusive sci-tive n sci-tive nn bugbox bugbox plus bugbox m concept 400 concept 400 m concept plus concept 1000 concept 1000 invivo2
 
 
 
 
STEM CELL - SCI-TIVE ALL INCLUSIVE          STEM CELL INVESTIGATION
 
 
Workstation for Stem Cell Investigation
Sci-tive has been designed to mimic in-vivo conditions providing a continuous cell culture environment which eliminates cellular stress linked to variations in temperature, pH and oxidation yielding better stem cell lines.
 
Features and Benefits:
 
- Lab in a Box - a Complete Closed Cell Culture Workstation.
- Offers very stable, user defined O2, CO2, temperature and humidity control.
- Live cell imaging system built-in.
- Large 390 litre incubated working area (1.17m wide x 0.57m deep x 0.59m high) allows incubation, passaging, media transfers and cell culture.
-

Large pass through interlock ( > 11 litres capacity) easily holds a variety of flasks, dishes and tubes.

-

Built in Hepafiltration system for both main Workstation and Interlock complies with Class 5 (ISO 14644-1), Class 100 (FED 209E) and Grade B (EU TCD 2004/23/EU).

-
-
-



Direct-Hand Access into Workstation, using simple Ezee Plug system, takes seconds.
Fully expandable, with options to upgrade to Dual Workstation Model
Early results for Mesenchymal Stem Cell expansion reveals:
1. Optimised frequency of CFU isolation
2. Optimised Cell numbers (per flask)
3. Reduced variability across cells recovered
4. Reduced transcriptional alteration
 

SPECIFICATIONS

Workstation Fabrication

Solvent Bonded Acrylic

Bench Space Requirements Height (excluding stand): 1024 mm
Width (side to side): 1650 mm
Depth: 760 mm
Internal Workstation Dimensions Height: 590 mm
Width: 1170 mm
Depth: 555 mm
Workstation Weight Approximately 230kg
Alarms Temperature: Visual and Audible
Humidity: Visual
Gas Low Pressure: Visual and Audible
Interlock Dimension Height: 210 mm
Width: 270 mm
Depth: 200 mm
Atmosphere Control Temperature: Ambient +5C - 45C
Humidity Control: Ambient-85% RH
O2 Control: 0.0%-20.9%
CO2 Control: 0.0%-30.0%
Integrated HEPA Filtration System
Activated Carbon Filtration System
 
Use the Capacity Checker to compare how many Plates/Flasks/Dishes fit into each Workstation.
 

STANDARD ACCESSORIES

Workstation

Stand
2 Racks with Perforated Shelves to Optimise Homogeneity
Direct-hand Access using Ezee Sleeve and Ezee Pleez System
Removable Front with UV Filtration Screen
Waste trays
Gas tight waste port
3 electrical power sockets

System PC and Software On-screen Keyboard
Independent Touch Pad Mouse
Windows Vista
Flat Screen Monitor
Imaging Camera
Cronus3 Imaging Software from RI
Gas Control Software USB Communications Port
7 Days Continuous Storage of Event Log Data
One Touch Calibration (O2)
On-Screen Fault Assistance
Microscope

Nikon AZ100 MZ Microscope fitted with triple nose piece and a single 2x magnification lens is supplied as standard which offers 46mm of working height. Other lenses can be purchased separately (choice is 1x or 4x magnification).
 

OPTIONAL ACCESSORIES

Cable Gland Port to allow the passage of cables through the workstation wall without altering internal conditions

Vacuum Line Port to allow the attachment of a vacuum line used to remove waste media from plates and dishes without removing them from the hypoxic conditions inside the workstation

Gas Sample Port to enable samples of the Workstation atmosphere to be checked

Palladium Catalyst if anaerobic environment is required

Anaerobic Indicator Strips to check anaerobic state of internal environment if required

Gas Tank Regulators

Gas Tank Filter Modules

Vibration Isolation Platform designed to minimise vibration originating from the Workstation or Laboratory Floor; can be used for vibration free incubation of microtitre plates, dishes or flasks

Adjustable incubation tray so that any micro-titre plates, flasks or dishes are kept absolutely level during incubation

Adjustable chair

Remote Monitoring Module allows users to be alerted by text message when gas pressure of O2 and gas pressure of CO2, temperature or humidity levels are out of specification

1x or 4x lens to fit into Nikon AZ100 MZ

Gas Level Verification Meter (Geotech 100) designed to monitor CO2, and O2 inside our Workstations, works under high humidity

 
 
  Copyright © AUSGIANT LABORATORY EQUIPMENT PTY LTD. All rights reserved.
25, 43 Johnson Street, CHATSWOOD, NSW 2067 AUSTRALIA
TEL: +61 2 9411 2452    FAX: +61 2 9412 2048    E-MAIL:
info@ausgiant.net.au
Click AUSGIANT LABORATORY EQUIPMENT (WWW.AUSGIANT.NET.AU)